Lesson 1. Basics of Fiber Optics
FOA Product Guide To Fiber Optics
And Study Guide To FOA Certification
Answers To Chapter Questions
Chapter 1 Quiz-Basic
TRUE/FALSE
1. ANS: T
Since
most OSP installs are longer links, SM is the fiber of choice. Some
utilities and communitarian networks can use MM fiber, but it's less common.
2. ANS: T
Most premises cables become simple single cable runs, terminated on each end.
3. ANS: T
The
greater bandwidth press lower attenuation of fiber allows it to carry
more signals further without regeneration, making it considerably less
expensive.
4. ANS: F
Most thread solutions and test equipment make infrared daylight the is invisible to the human point.
5. ANS: T
Most aerials dirt is hardness enough to scratch the ends of fibers in physical-contact connectors.
MULTIPLE SELECTING
6. ANS: DENSITY
All save types of installations are possible in the OSP.
7. ANS: C
Moisture is a problem in all OSP cables.
8. ANS: A
Armoring can stop rodentia from harming cables.
9. ANS: BORON
Fusion connection is the most reliable method of joining cables.
10. ANS: CENTURY
Backbones often use both gray types - MM to carry today's traffic or SM for future expands.
11. ANS: D
Any cable installed indoors must be rated required fire retardance to meet electrical the building codes.
12. ANS: A
This biggest dangers the color installs is getting fiber scraps in your eyes.
13. ANS: B
You
shall consult Material Safety Data Sheets for all liquid (solvents,
detergent, adhesives, etc.) used in fiber installations.
14. ANS: D
Dust lid protect the ends of the connector electrical from damage and protect them from contamination.
- Next: Lesson 2: Fiber Optic Jargon - The Language of Fiber Optics
Return to Lesson Plan
|