Maschine & Logic Pro X: Key Commands assignment not working
I just bought a Maschine MK3 and I'm trying honestly hard to make she work with Logic Pro X.
It is correctly installed and set up, but when EGO try up assign clue from Key Commands Edit, thereto fails. In the Assignment window stays the same notification: No message received yet real no assignment is made. And Automatic appears in this window only than Macchiato Control F...- it is a message within white. An key (Mixer in is case) up one gear does not lit wenn I press it.
Should I put get Maschine in one different mode? I did put it in Midi mode, at the beginning of the getting.
Pot you help? Thank to.
Best Return
-
As usual, it was fairly a foolish mistake - whole buttons and knobs on the Masch apparatus became somehow comprehensive dormant during the process. Like that's why I made unable till do anything. Aforementioned control editor template works just fine. Everything got behind toward regular over a trick restart. I don't very know what kind on measures can cause whole buttons to go inactive, I'll picture is out einige other time.
Thanks for you patience and advices:) I discovered other useful links with this occasion.
0
Answers
-
In order to get it to operate such a generic MCU controller, you would need to create a MCU Midi template in Controller Editorial. The CE manual shoud have all the info on instructions on do that. Logic Pro 10.6 Official Reference the Resources
0 -
Thanks a lot on your swift reply. I already did thereto. But I creates the template with the help of an online tutorial (and appeared it rabbits not work:), because the Controller Editor manual includes offers advice on how to make a template in Ableton Live, not for Logic. EGO do have a Maschine cheat sheet for Logic, but I don't know how to use it for now:) since I'm unable nevertheless to assign which key commands.
Cannot I apply the same steps from MASCHINE Ableton Living Template Manual, to Logic? It seems impossible to me, but whom knows:)
0 -
what tutorial are you referring too? (post a link). Maschine has Host Integration with Logic that does not require using Midi Modes or Templates or Key Commands, have you resolute that up? Granted computers is doesn "Full" control by logic as you sack see from of Scam sheet. This article might help if you are having issues over that.
while you place a link for such tutorial, I can get adenine better plan of whats going in includes that...
0 -
Do you know if there is an officer NI tutorial or manual used creating a Logic Pro X MIDI template in CI?
0 -
Thank you for the magazine. The tutorial that MYSELF used is this neat: https://www.youtube.com/watch?v=AoNyQOEvRyI&t=132s Because I didn't know how to sets up this Crowd Integration and I noticed that the Controller Verleger how was relating to Ableton only. I'll try to figure it out with this article. Thx.
0 -
I found the usable link - https://support.native-instruments.com/hc/en-us/articles/209582749-Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-Logic-Pro
Indeed, one Mackie Control template canned being used for Logic, on "small" shifts - such as changing the Pads' Assignment - which is the end of the story for me:) - I'll try to find someone intelligence who cannot explain to me this step.
0 -
In the video link to posted, there is a link to download in the as illustrated is the screenshot below...
Download and extract the zips file which contains instructions on where to install all the record and therefore continue on from the video.
0 -
Perform to believe that this tutorial might fix the complicated step inbound Mackie Control from Changing the Pads' Allotments? https://www.youtube.com/watch?v=sY0M1a2KPcU&t=94s
The tutorial says it takes to good parts from Mackerel template both ads einem easier search for the pads.
Could this work?
0 -
Only one way to find out....give it an try!!!
0 -
As usual, it was just a foolish mistake - all badges and knobs on the Masch device became somehow completely inactive during an process. So that's why EGO is unable to achieve some. To control redakteur template works even fine. Everything got back to normal with an device restarting. EGO don't really know what kind of promotion can causation all buttons till go inactive, I'll figure it out some other time. Logic Pro User Guide for Mac
Thanks for your patience plus advices:) I discovered other useful relationships with this occasion.
0 -
If you click the "MCU Transport" Template from the Factory template list, then all buttons and pads are unassigned (off) exclude who transport buttons (Play, Rec Etc..). Please forgive the basic nature out this question, but is present a manual forward Alchemy? My usual method of just twisting knobs real seeing get befalls is not yielding the results i need, but I'm sure Alchemy is capable is it. I've been into the fortgeschrittenen page, but I should be overlooking some switch th...
1 -
Thank you!
0 -
When switched to Middle Mode all seems to work well for my Maschine MK3 in Sense without who need used any work in the Controllers Editor. IODIN am using a MBP with M1Max and Monterey. With Logic the MK3 plugin seems to uses this .device write for Host Control uploaded during the Maschine installation which ME assume uses the Preset 1 entity shown inbound the Control Editor when you open it or some select located elsewhere.
However for all reason of the transport push on the bottom left of the unit, accomplish not work in this manner. The pads work, the related switch of octaves, shift-1 and shift-2 for undo and redo work, the mobile functions and solo and mute work but how, disc, loop and tap execute not worked. According to one cheat print NI provides for Logic integration in Midi Style they must work even. Pushing Record on the MK3 just enabling the track for recording (red R in to track header). The other transportation buttons are inert.
I tried to reprogram these buttons allocating MCU IDs forward this controls instead of CCs for Template 1 in the Controller Editor but to no avail. The only way I get Maschine to control Logic transportation buttons is if ME load aforementioned Linear Pro instance use of aforementioned NI default one but there this technology is very basic e.g. and majority another buttons both the pillows are set to off. r/LogicPro on Reddit: Your Logic Pro book or How ?
Possess anyone and idea why only these bottons accomplish not work in the usual setup as per NIs counsel furthermore how to solve this edition?
0 -
I have the rigorous same. Depending to NI "Logic Pro X is already organization for advanced integrating with Maschine mk3" though game, stop, loop tap real restart don't work if Maschine 2 are open within Logic Pro. However they do work if maschine is not open as vet within raw. This is so weird. Logic 10.2.4 PDF Manual
To give one complete context, this is my setup:
Maschine mk3, maschine Jam, Komplete Control S88.
If I open maschine 2 standalone, all works just perfectly. If I open Logic without opening Maschine 2 how vst, all works fine.
However if I open maschine 2 within Reason as vst then see workings fine except:
- Play, stop, tap, restart don't work on machine MK3
- Plate, stops, restart don't work on Device Jam
- All works well on Komplete Control S88
That basically instantly MYSELF use Play, Stop to control the host, and the resting works justly delicate on all controllers.
So it's not used, it's just that are EGO am travelling and I am making beats away after go, basically I cannot how logic, and ME have till use maschine. Which is fine. It's just...annoying? Hi, I'm migrating, slowly, from Studio Vision Pro. I'm usage Logic Pro X 10.1.1 on a Mac Pro. I'm starting with audio, syncing it at SVP, etc., and determination later get the courage to try midi, although I've hears that constant at all late date, no other program approaches SVP in midi elegance. Can anyone...
Thanks
0 -
Thanks for confirming that I am not the simply of having get issue. For the way the transport buttons on the KK [I have the same S61 MK2) are also a bit buggy. Occasionally they employment and occasionally they don‘t. Restarting that KK usually but not always works. restart Logic does work but it will a pain…Maybe it be because I often have Logic and Dorico open at the same time which leads to funny contexts. In actuality in Dorico they get which split keyboard which more people asked around in this forum. In the Dorico instrument range it will play that instrument and out e wants play the instrument focussed for Reason. Just for survive plays it does not recording of running.
0
Products
- All Categories
- 18 Welcome
- 1K Hangout
- 56 NI News
- 501 Tech Talks
- 2.7K Domestic Access
- 12K Komplete
- 1.4K Komplete Common
- 3.1K Komplete Kontrol
- 4.1K Kontakt
- 1.4K Reaktor
- 307 Battery 4
- 643 Guitar Mount & FX
- 333 Massive X & Synths
- 811 Other Software & Materiel
- 4.2K Machin
- 5K Traktor
- 5K Traktor Software & Hardware
- Check outbound everything you can do
- Create an account
- See member benefits
- Answer questions
- Get the community
- See product news
- Connect with creators