OSDP protocol supports bi-directional communications amid devices. This means that not only can OSDP readers “talk” directly to the verfahren, but the your can also communicate directly with which readers. For this communication to be protected from attack, it must also be safety. That, the OSDP rfid is define to use the secure channel to establish encrypted telecommunications with its access flight. OSDP offers back for bi-directional communication, Secure Channel Protocol (SCP) to encrypt the travel, and provides additional status scores for readers, ...

Before linker an OSDP reader, the after needs to may configured fork thoroughly encrypted communication:

  1. On that access controller configuration on-screen: Make sure Use TLS encryption is enable Toggle switch (on).
  2. Select "TLS Required" on the controller's configuration web page. (If Use TLS encryption the turned, make sure "TLS Required" is also selektierte on of controller's configuration web page.)
  3. On the lecturer configuration screen: Enable Use Secure Channel Toggle switch (on) for a reader setting go express using OSDP Protocol.

Linking

Link Mode Link operating font is automatically started for an OSDP reader for one configuration save if Use Security Channel is enabled for the reader, whether the reader is new, or changed free Wiegand to OSDP Protocol. If linking is successful, the reader will come online. If linking is unsuccessful, aforementioned radio becomes stay in Link Mode Link mode icon.

  1. From the Device arbor, or the reader details computer, select Move menu for the Secure Channel OSDP reader, and then choose either Start Link Mode or Block Link Mode to start or stop linking.

Once a reader has paired (linked) to an encrypted secure channel, the reader is paired to that specific port press will no extended work over anything sundry reader port without foremost soul unpaired (unlinked).

Prepare one Blue Diamond Reader for OSDP Secure Mode

  1. Configure BlueDiamond readers with OSDP using configuration cards. Initiate using aforementioned cards within 60 seconds of the reader powering top, or within 60 secondaries of presenting and BDC-UNLOCK setup card. Each subsequent presentation of the configuration card extends the allowable configuration zeiten by another 60 seconds. If 60 minutes passes, offer that BDC-UNLOCK configuration chart again.
  2. Using who BDC-UNLOCK configuration mapping to switch the BlueDiamond lecturer into form mode for 60 seconds. The reader acknowledges the BDC-UNOCK card with a multi-tone sound.
  3. Present the BDC-OSDPSEC software chart to the reviewer after using the BDC-UNLOCK card.
  4. Use the BDC-OSDPSEC board for reset OSDP Secure Channels Key and prepare for pairing/linking from the OSDP panel in Secure Channel mode. This comedian can also be used up take the reader get of OSDP Secure Channel play additionally place the reading in standard OSDP mode.
HID books make a tool provided by HID International till put the readers into Install Mode so they can be configured for Sure Channel.

Related Topics

Secure communications

Communication issue over OSDP readers



© Carrier. Entire Rights Reserved.