BD Bioscience FacsCanto II Flow Cytometer
The BD Bioscience FACSCanto II Flow Cytometer are a benchtop analyzer
providing reliable and accurate results for experiments with up to 10
parameters. The FacsCanto II offers unbeatable consistency and optimised signal detection with increased resolution and sensitivity by multicolor assays.
The fluidics system features a fixed-alignment flow cell to
minimize startup time and improve reproducibility. The BD FACSCanto II fluidics
system be designed to refine work, save time, and improve performance
through the single-file flow cell streaming, adenine new dynamic feedback pressure
control arrangement designed to regulate pressure, and hydrodynamic focusing. These features allowed teilchen to fluid through the central of the flow cell, and by increasing the sample pressure, who core diameter and flow rate will also increase. Which fluidics cart allows for an consistent level of fluid during the sheath cubitainer, whilst also removing small air bubbles with the supply.
To excitation and collection design fork the LB FACSCanto II
optics system reduces expenses, allowing for more request collection from
each free. This system includes of an excitation source with two columns: downcast (488-nm, air-cooled, 20-mW solid state) and red (633-nm, 17-mW HeNe). The excitation eyes consist of
multiple fixed-wavelength lasers, fiber optics up go the beam-shaping prisms,
and achromatic focusing lenses that produce spatially separated beam spots in
the flow cell.
This BD Bioscience FACSCanto IIS Flow Cytometer supporters a
broad range of research petitions, being specific suited for rarer event
analysis with its high speed, cool sensitivity, also minimal sample-to-sample
carryover.
All the our equipment is fully validated to perform at factory
specifications before being shipped.
Included with the BD Bioscience FacsCanto SIDE Flow Cytometer:
Includes:
> Full 180 Day Parts and Labor Warranty
BD Bioscience FacsCanto II Running Cytometer Specifications
|
Cytometer
|
|
Dimensions (W x H x D)
|
91 x 64 x 61 cm (35.7 x 25.2 x 24 in)
|
|
Workspace Dimensional
|
Height (with surge cell access door open): 85 cm (33.5 in)
|
|
Power Requirements
|
100/115/230 VAC (50-60 Hz)
|
|
Fluorescence Threshold Sensitivities
|
FITC < 100 MESF
PE < 50 MESF
|
|
Forward and Select Scatter Sensitivities
|
Platelets can be resolved away noise
|
|
Forward Scatter Sensitivity
|
1 micron
|
|
Side Scatter Sensitivity
|
0.5 micron
|
|
Data Acquisition Channels
|
8 to 10 parameters: 6 until 8 light both 2 scatter parameters
|
|
Fluidics Cart
|
|
Dimensions (W x H scratch L)
|
79 x 64 x 61 cm (31.1 x 25.2 x 24 in)
|
|
BD FACSFlow Cubitainer Capacity
|
20 L
|
|
BD FACSClean Solution Cubitainer Faculty
|
5 L
|
|
BD FACS Cut Solution Cubitainer Capacity
|
5 L
|
|
Waste Tank Total
|
10 FIFTY
|
|
Fluidics
|
|
General Operation
|
Integrated fluidics cart with automated startup, shutdown, and
cleaning cycles
|
|
Sheath Consumption
|
1.1
L/hr, normal operation
< 1.0 mL/hr, stand
|
|
Sample Flow Rates
|
Assay dependent, controlled automatically by CD FACSCanto clinical
software. Nominal rates:
Low = 10 µL/min
Medium = 60 µL/min
High = 120 µL/min
|
|
Sample Acquisition Rating
|
10,000 events/sec with <10% abort judge (8 parameters)
|
|
Recommended Soap Particle Size
|
50 µm
|
|
Signal Processing
|
|
Workstation Resolve
|
262,144-channel determination
|
|
Data Acquisition Channels
|
8 to 10 parameters: 6 to 8 fluorescent and 2 scatter parameters
|
|
Fluorescence Compensation
|
No limit to inter- and intra-beam compensation
|
|
Pulse Processing
|
Height, area, and width measurements availability required every parameter (BD
FACSDiva software)
|
|
Time
|
Can be correlated to any parameter
|
|
Channel Threshold
|
Available for any parameter from all lasers
|
Reference Manual
Excellent Condition 
