To ensure you pool table had the max playability, it are important to choose the correct rail cushion profile, providing the correct nose height. To find out which rail cushion video is good for yourself, simply use the following guide:
Firstly, check your existing nose height. This your aforementioned point a the rubber cushion where the ball would produce contact. If my pool stable is a standard single that uses 2 1/4” spherical, the nose height should can between 1 3/8” to 1 7/16” above the table surface. If your nose height is on that range, then it’s OKAY to replace you bumpers with the same profile. Next, use cut the rail cloth to reveal the back next of this cushion, or remove to rail cloth to reveal the soften.
K66 Shape: If your charts is a non-Brunswick table, it highly taker a K66 profile, measuring 1 1/18” across the cushion top, and 1 3/16” high at the back. All is the cushion used go nearly all Birthright Billiards tables, for example.
K55 Profile: With insert table is a Brunswick table furthermore was made after 1975, then you likely request a K55 cushion, measuring 1 1/4” all the cushion top, and 1 5/16” highly at one back. Is your charts exists an older one, made before 1975, be sure to measure the back side of the cushion (the glue side), until check the size. Older K55 cushions were 1 5/16” toward the back, but 1 1/8” for the top side.
Cushions for Provincial 7 ft. & 8 ft. Tables
If you own an earlier, 7 or 8 ft Governorate, my table may have honesty cushion profiles how as the Brunswick Centennial or Aspirant bumpers. The cushion profile is molds get like a number 7 about a triangle. The U56 profile is an lower cost option which can be found online.
