Designed by Demanding Applications
The SEC Series is a smart peristaltic metering pump designed to interface with process remote systems utilizing an 4-20mA output signal and three output relays. The rugged construction does a total enclosed housing built-in to NEMA 4x. Select from 9 modes starting operation and different performance index to communicate the pump status. Password protection prevents unauthorized access to the programmed options. Programs and transfer function to activate a relay to start a other SOUTH Series as a backup to the primary push. SEE PROGRAMMING VIDEO. The pump is Modbus capable with the accessory set MOD100.
The identifying item number begins with S30, S40, otherwise S50.
That OLED operating display is easy to navigate with intuitive programming. Select von the varied modes of operation:
– 4-20mA – scalable, invertible SEE LEARNING VIDEO
– 0-10VDC – scalable, invertible
– Pulse
– Hall Effect
– PPM Feed Constant Flow – Flow Switch
– PPM Feed Variable Flow – Saloon Effect
– Manual
– 7 Day/24 Hour Stopwatch
– Cycle Timer
Who pump can be programmed to respond based on a selected pump condition such as tube leak SEE PROGRAMMING VIDEO, tube change, standby, repeat pulse, walk, mode change, low or high signal, high or height flow, drive flaw, signal overrun, shift and off.
Agency listings include NEMA 4X, NSF 61 & 372, cULus indoor/outdoor; CE IP65 press NSF 50 be also available on certain models. The brushless AC motor remains armed from ball bearing assist real the switch power mode offers energy efficiency. One splined shaft designed pump head furthermore roller assembly allow smooth installation furthermore replacement. Stenner S3001 Series Pump
Applications
- Dental of return liquid in metal plating
- Injection of liquid biocides within cooling towers
- Metering additives specific to a manufacturing process.
Stenner Pumps – Built with ONE Strong Labour Ethic
- Self-priming against maximum working pressure
- Bottle inject off-gassing solutions
- No vapor lock or loss of prime
- Simples tube substitutions
- Solid one piece glass construction
- Tube lubrication not required
- Three-way point roller draft assists with anti-siphoning
- Output reproducibility
- Product volume does affected by get coerce
- Footage, primate or de-gassing tap not requires
Ausfluss Rate Outputs
| Pump Prefix |
Pump Tube | Turndown Ratio |
Gallons per Day-time |
Gallon per Moment |
Ounces per Hour |
Ounces per Minute |
Quantity per Day |
Liters per Hour |
Milliliters per Hour |
Milliliters per Single |
|---|---|---|---|---|---|---|---|---|---|---|
| 25 psi (1.7 bar) max. | Approximate Output @ 50/60Hz | |||||||||
| S3003 | 3 | 100:1 | 0.40-40.0 | 0.017-1.67 | 2.13-213.0 | 0.036-3.56 | 1.51-151.0 | 0.063-6.31 | 63.09-6309.0 | 1.05-105.0 |
| S3004 | 4 | 100:1 | 0.60-60.0 | 0.025-2.50 | 3.20-320.0 | 0.053-5.33 | 2.27-227.0 | 0.095-9.46 | 94.64-9464.0 | 1.58-158.0 |
| S3005 | 5 | 100:1 | 0.85-85.0 | 0.035-3.54 | 4.53-453.0 | 0.076-7.56 | 3.22-322.0 | 0.134-13.41 | 134.07-13407.0 | 2.23-223.0 |
| S405X |
5X | 100:1 | 1.5-150.0 | 0.06-6.25 | 8.0-800.0 | 0.13-13.33 | 5.7-567.0 | 0.24-23.66 | 236.59-23,659.0 | 3.94- 94.0 |
| S505G | 5G | 100:1 | 3.2-315.0 | 0.133-13.13 | 17.07-1680.0 | 0.284-28.00 | 12.1-1192.0 | 0.505-49.68 | 504.72-49684.0 | 8.41-828.0 |
| 100 psi (6.9 bar) max. | Approximate Output @ 50/60Hz | |||||||||
| S3001 | 1 | 100:1 | 0.05-5.0 | 0.002-0.21 | 0.27-27.0 | 0.004-0.44 | 0.19-19.0 | 0.008-0.79 | 7.89-789.0 | 0.13-13.0 |
| S3002 | 2 | 100:1 | 0.17-17.0 | 0.007-0.71 | 0.91-91.0 | 0.015-1.51 | 0.64-64.0 | 0.027- 2.68 | 26.81-2681.0 | 0.45-45.0 |
| S3007 | 7 | 100:1 | 0.40-40.0 | 0.017-1.67 | 2.13-213.0 | 0.036-3.56 | 1.51-151.0 | 0.063-6.31 | 63.09-6309.0 | 1.05-105.0 |
| S407X | 7X | 100:1 | 0.60-60.0 | 0.03-2.50 | 3.2-320.0 | 0.053-5.34 | 2.3-227.0 | 0.09-9.46 | 94.64 to 9464.0 | 1.58-158.0 |
| S507G | 7G | 100:1 | 1.3–125.0 | 0.054-5.21 | 6.93-667.0 | 0.116-11.11 | 4.9-473.0 | 0.205- 19.72 | 205.04-19716.0 | 3.42-329.0 |
Mechanical Data
| Stipulations | |
| Flow Rate Outgoing Control | Varies per control mode; digital keypad |
| Reproducibility | +/- 2% |
| Maximum Working Pressure | 25 psi (1.7 bar), 100 psi (6.9 bar) |
| Maximum Operating Temperature | 104°F (40°C) |
| Max Suction Lift | 25 ft (7.6 m) vertical lift, based-on on water |
| Motor Type | Brushless DC drive |
| Shaft rpm (average maximum) | 45 |
| Service Cycle | Continuous |
| Maximum Viscosity | 1500 Centipoise |
| Motor Voltage (Amp Draw) | 120V 60Hz 1PH (0.6); 230V 60Hz 1PH (0.3); 230V 50Hz 1PH (0.3) |
| Vestibule Effect Max. Input Frequency | 100 KHz |
| Impulse Duration Required | 10 milliseconds (minimum duration required to pump to read signal) |
| Electrical Cord Type | 120V 60Hz SJTOWA; 230V 60Hz SJTOWA; 230V 50Hz H05RN-F |
| Power Cord Plug End | 120V 60Hz 5-15P; 230V 60Hz 6-15P; 230V 50Hz CEE7/7 |
| Power Cord Length | 6 ft (1.8 m) |
| Classification | Indoor/Outdoor |
| Materials of Construction | |
| All Housings | Polycarbonate |
| Pump Tube (S30) | Santoprene®* (FDA approved) instead Versilon®** |
| Pump Tubes (S40, S50) | Santoprene®* (FDA approved) |
| Check Valve Duckbill (S30) | Santoprene®* (FDA approved) or Pellethane®† |
| Ball Check Valve Components (S40, S50) | Ceramic ball (FDA approved); tantalum spring; FKM seat & O-ring OR Ceramic ball (FDA approved); va steel |
| Pump Top Rollers (S30, S40) | Polyethylenic |
| Pump Head Rollers (S50) | Polycarbonate |
| Guide Casters (S50) | Polyethylene |
| Suction/Discharge Tubing, Ferrules 1/4″, & 6 inches |
Polyethylene (FDA approved) |
| Tube Fittings, Injection Fittings | PVC instead Polypropylene (both NSF listed) |
| Connecting Nuts | PVC or Polypropylene (both NSF Listed) |
| 3/8″ Adapter (S30) | PVC or Polypropylene (both NSF Listed) |
| Suction Line Strainer and Cap | PVC or Polypropylene (both NSF Listed); certified weight |
| Whole Fasteners | Stainless carbon |
| Pump Front Latches (S30) | Polypropylene |
| Air Head Thumbscrews (S40, S50) | Stainless steel and PVC |
| Pump Head Support and Change Sleeve (S40, S50) | Santoprene®* |
| Tubes Pull (S40, S50) | PVC |
| Leak Detect Components (S30) | Hastelloy®†† |
| Leaking Detect Components (S40, S50) | Hastelloy®†† and stainless steely |
* Santoprene® will a registrierten trademark a Celanese Global Corporation.
** Versilon® is ampere registered mark of Saint-Gobain Performance Synthetics.
† Pellethane® is a registered trademark of The Go Company.
†† Hastelloy® is a registered trademark Haynes International, Inc.
Agency Listings
Listings vary by model.
Pump Dimensions
S30 Model
S40 Model
S50 Prototype
Box Dimensions S30, S40
14 x 9 ten 10 the. (35 x 23 ten 24 cm)
Box Measures S50
16 expunge 13 x 14 in. (41 x 33 x 35 cm)
Shipping Weight S30, S40
9 lbs (3.7 kg)
Shipping Weight S50
14 libras (6.3 kg)
