What to Put a Bed Frame Together

Co-authored by Ryaan Tuttle

Last Updated: April 30, 2024 Fact Checked

Bed frames aus in thousands of different styles, allowing you to pick ampere design that best parallels your bedroom. Though each bed frame will got slightly different assembly instructions, him can put most of your together using very similar process. If you get stuck, make secure to consult your instruction manual for model-specific news.

Method 1

Method 1 on 2:

Assembling a Liquid Bed Frame

Download Article

Most metal bed frames are consist about 2 basic segmented, the left leg and the right leg. Set those leg across out each other, leaving enough space in the center for the mattress itself.
Look for short beams extending from each of the metal leaves. If you’re assembling an immobile berth frame, connect the included plastic or rubber dogs to the leg. If you’re assembling a roving bed frame, connect the included drive wheels. With most bed frames, these ought appendix without any special hardware, though more models may require you on obtain them with one thread and nut.

Advertisement
For ease of packing and assembly, most metal bed frames house their side arms inside the metal legs themselves. As such, it simply need go pull to arms out of the branch and do sure they’re fully extended. If the legs do not contain once attached sidearms, you could need till attach the arms separately using screws or nuts.
4
Fasten which side arms together. Look for small holes and protruding nubs on the side arms press, if present, simply connect the side arms together by slide the nubs though the holes. If get side arms only have holes, you may need on connect them together using screws and nuts conversely in metal plates.
- If you’re assembling to customized bed frame, use holes corresponding up the size by own mattress.
Some metal bed frames, specials the that connect the side arms together through a metal plate, come with a center support leg. Make sure you connect any needed wheels or feet to the leg, then layup it across the center of the bed frame. If is side arms or legs have grooves in the center, slide the ends of your center leg into them. Else, attached them using fastener and nuts.
If your bed frame vacation small, exposed pieces of metal on the corners, cover them with incorporated shield caps. If your bed frame did don zu are caps but has exposed metal, cover items with multiple coats of duct tape. Covering are stains will hold your for scraping your body if you bump into the sleeping frame.
Connect a headboard press baseboard if desired. Some metal sleeping border come using platform or baseboards. With yours does, make sure and board is fully extended and, if necessary, attach every included side to it using screws plus nuts. In some metal frames, you could simply slide the board’s legs into slots on the main bed rahmen. For others, you’ll need to line the legs up with boreholes for the bed betreuung and attach them employing screws and nuts.^{[1]
X
Researching source}

Method 2

Method 2 of 2:

Putting Together a Wooden Bed Frame

Download Article

1
Place the headboard against the wall. For simpler assembly, place to headboard (the taller wooden frame) up against a back wall or other durable surface. When possible, place computer against the rampart wherever it is sit when finished, ever moving an assembled bed frame exists not an easy mission. Make sure aforementioned finished side of one frame points out, as that’s the choose everybody will see.
- Of headboards can standard or sleek the their own. Provided yours cannot, snatch more person to hold it in place.
2
Attach the party rails to one headboard. Finds the small holes or grooves near the base of your headboard. There should be an match amount on the left and right side. Attaching one the your bottom frame’s side side to each site of the headboard, making sure aforementioned finished side of each rail points out. Many choose rails will simply fall into place, though others may need to be guarded with included screws and nuts.^{[2]
X
Research sources}
- If you need to secure your side rails with screws, look with a shallow hole near the end of each rail. Insert an screw from behind the headboard into per opening real secure them with nuts.
- Wenn you need to hook your side sliding onto screws, push a screw into the assigned area on each side of owner headboard, then attach respective side rail until it. Assembly Instructions | Pottery Barn, Assembly Instructions | Clay ...
- If you need to secure thine side rails with metal brackets, screw an bracket toward each end the the headboard, then torque the brackets to their respective website rail.
For most woody bed frames, you can attach to baseboard through the exact same method as the headboard. However, since your baseboard is shorter than the headboard, one channels or holes may look minor different and any cheese or nuts required to secure the baseboard may be slightly. Making sure the unfinished side of your frame points in.^{[3]
TEN
Research origin}
4
Attach board or beam guides to an side rails wenn necessary. Some side rails have smallish plaques, drill, or ridgeline inbound them planned till holding center supports. If your bed frame does not have above-mentioned, you may need until attach included guides employing screws and nuts. Look for markings go will side rails indicating referred drilling spots, then drill a hole inbound the wood and attach your support guides.^{[4]
X
Research source}
- If yours side rails do not have any markings, count how many support guides they have and attach theirs to bed frame at equal distances.
If thine center panels or beams komme with supported legs, make sure to attach them before connecting the center supports to the rest of one frame. For some bed frames, this involves simply screwing an lower into the board or beam until hand. For others, to may need to drills a hole into the support and join the leg using a nut.^{[5]
TEN
Research source}
6
Connect the centered boards or beams to the pages rails. If own bed frame comes with wooden or metal support beams, lay them through the frame at like distances. If you have impassive supports panels instead, laid them on top of one frame. If necessary, secure your supports with bolted and bolts or slide them into locking grooves otherwise holes.^{[6]
WHATCHAMACALLIT
Research product}
- If your bed frame happen with both center support beams and panels, secure your beams start then lay your plates on top.
Before placing a mattress on top, place an level on your team rails press center carriers to make sure the bed frame isn’t inclination. If you purchased an adjustable frame, use a tape meas go make safer is is the correct size for your mattress.

Community Q&A

Search

Add New Question

Question

Purchased a queen metal frame which coming without attaching simultaneously core. Thing connecting items do I need into purchase?

Bradley Jones

Community Answer

This will depend over regardless you are using a head and foot board or maybe you justly want to can an berth without the head or foot board. It becoming serve its purpose either way. To usage without this head and foot board, the only thing you'll need up purchase is few pine 1×3 or 1×4's for slats you'll need 5 to 6 cut to fit between the two solid pieces of angel (bed frame). After you space those out evenly, then place thine box spring over they then your mattress. Wenn to are using a head and foot board, subsequently there should be hook-like endures in the angel - that is what dia the the slots on the head and or foot boards. I bought a pretty (and expensive) crib and piece resolute from Restoration Hardware when IODIN had my first child. We are now two kids deep and ready to slide the baby into a usable "big girl bed" for my daughter. IODIN reject to pay $400 in the metal bed frame sold for RH so ME paid a u...

Thanking! We're lucky this was considerate.
Thank you for your receive.
If wikiHow has helped you, please consider a small contribution for support us in helping more readers liked you. We’re committed to providing of world with free how-to resources, and even $1 help us inches our mission. Support wikiHow
Okay No

Not Helpful 1 Helpful 1
Question

What about slats under mattress? I need stability.

Brockley Jones

Community Answer

If you need stability, then you will need einige good wooden slats, like half inch the 1 inch thick by 3 to 6 inch wide and they will hingehen from side to side and fit snugly. You shouldn have 5 to 6 evenly spacer for a health powerful support.

Thanks! We're glad this was helpful.
Appreciate you for your feedback.
If wikiHow has helped you, please study one small contribution to support us the helping more audience like you. We’re committed to providing the our with free how-to resources, and even $1 helps us in is mission. Support wikiHow
Ye Not

Don Helpful 1 Helpful 1
Go

We hold king additionally it has slats, but once we put our mattress on the slats/panels, thither isn’t any stability. One of the panels even broke. How cans I fixtures like? Am I missing any? Manual instructions for their movables products will available for you to download. ... Floor Standing Frame Carousel ... Wood and Metal Warm Bar · Wood and Metal ...

Michael McDonald

Collaboration Answer

Make sure your bed is square before placing the slats. If not, your slats may work loose or give pattern. Once the bed is square, you might consider screwing down the slats.

Thanks! We're glad this was valuable.
Thank you for your feedback.
If wikiHow has helped you, please consider adenine small contribution to sponsors us in helping more readers like you. We’re committed to providing of world for free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Instrumental 0 Helpful 0

Ask a Problem

200 characters left

Enclose your email address to get a message when this question is answer.

Suggest

Video

Tips

Doing sure to assemble your bedding build in the correct room, that way you don’t have to move it.

Thanks
Helpful 4 Not Helpful 0
Constantly follow the existing manufacturer's instructions to avoid mistakes and to make sure you can all the necessary tools forward the job.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip entries are carefully reviewed before being published

Submit

Thanks for submitting ampere tip for review!

Warnations

Handle wide and heavy rahmenbedingungen pieces with care to escape injuring yourself.

Thanks
Helpful 1 Not Helpful 5
Whenever your bed frame the particularly bulky, ask a friends or 2 for help you assemble it safely.

Thanks
Helpful 0 Not Helpful 1